WRX / STI 75 MM Drive By Wire Throttle Body is a direct replacement of the factory unit. The throttle body is designed in such way that it will have to use stock TPS and servo motor.

This Throttle Body will only accept stock TPS cover and servo motor from factory BOLT ON unit

It fits 2004.5 and newer WRX and STI models with drive by wire TB. Our 75 MM throttle body comes as a kit including stock manifold adaptor plate and 60 MM hose adaptor (for those that want to use it immediately with stock intake pipes). The kit also includes 75 MM hose adaptor and all mounting hardware. Throttle bodies are CNC machined of billet aluminum. Parts are available in natural aluminum, red, blue and black anodized finishes. Increasing the diameter to 75 MM gives almost 56% increase in throttle cross section area over the stock throttle body. Replacing stock throttle body with our new 75 MM (even with stock pipes and turbo) will give you a few additional HPs and greatly improve engine response. Replacing the stock throttle body with our 75 MM throttle body and replacing intake piping with larger diameter (75 MM) gives limitless possibilities of increasing engine power. All parts are manufactured to our legendary high quality standards and backed up by our warranty.

NOTE: Non-US buyers please contact us before making a purchase.

WRX / STI 75 MM Drive By Wire Throttle Body is a direct replacement of the factory unit. The throttle body is designed in such way that it will have to use stock TPS and servo motor.

This Throttle Body will only accept stock TPS cover and servo motor from factory SNAP ON unit

It fits 2004.5 and newer WRX and STI models with drive by wire TB. Our 75 MM throttle body comes as a kit including stock manifold adaptor plate and 60 MM hose adaptor (for those that want to use it immediately with stock intake pipes). The kit also includes 75 MM hose adaptor and all mounting hardware. Throttle bodies are CNC machined of billet aluminum. Parts are available in natural aluminum, red, blue and black anodized finishes. Increasing the diameter to 75 MM gives almost 56% increase in throttle cross section area over the stock throttle body. Replacing stock throttle body with our new 75 MM (even with stock pipes and turbo) will give you a few additional HPs and greatly improve engine response. Replacing the stock throttle body with our 75 MM throttle body and replacing intake piping with larger diameter (75 MM) gives limitless possibilities of increasing engine power. All parts are manufactured to our legendary high quality standards and backed up by our warranty.

NOTE: Non-US buyers please contact us before making a purchase.

WRX / STI 75 MM Throttle Body is designed in such way that it will use stock idle control and TPS. It fits 2004 and earlier WRX and STI models with Drive by Cable TB. Our 75 MM throttle body comes as a kit including stock manifold adaptor plate and 60 MM hose adaptor (for those that want to use it immediately with stock intake pipes). The kit also includes 75 MM hose adaptor and all mounting hardware. Throttle bodies are CNC machined of billet aluminum. Parts are available in natural aluminum, red, blue and black anodized finishes. Increasing the diameter to 75 MM gives almost 56% increase in throttle cross section area over the stock throttle body. Replacing stock throttle body with our new 75 MM (even with stock pipes and turbo) will give you a few additional HPs and greatly improve engine response. Replacing the stock throttle body with our 75 MM throttle body and replacing intake piping with larger diameter (75 MM) gives limitless possibilities of increasing engine power. All parts are manufactured to our legendary high quality standards and backed up by our warranty.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of WRX Drive by Cable 75 MM throttle body to aftermarket intake manifold with stock bolt pattern and 75 MM bore. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of WRX Drive by Cable 75 MM throttle body to any aftermarket intake manifold. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum finish. Adaptor requires welding to the manifold.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of 75 MM Drive by Wire throttle body to aftermarket intake manifold with stock bolt pattern and 75 MM bore. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum, red and black anodized finishes.

NOTE: Non-US buyers please contact us before making a purchase.

Adaptor plate that will allow mounting of 75 MM Drive by Wire throttle body to any aftermarket intake manifold. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum finish. Adaptor requires welding to the manifold.

NOTE: Non-US buyers please contact us before making a purchase.

The next generation of fuel rails is specially designed for Subaru WRX. The rail is made of CNC machined aluminum. The fuel rail has large 12.7mm internal bores (compared to previous verion 8.75mm bore) and larger AN-6 threaded ports (previous version used 1/4 NPT ports). It is available in natural aluminum, blue, black and red anodized finishes. The kit guarantees even fuel distribution by redirecting the fuel to all cylinders. This action should enhance the performance and add more power to the engine. The rail not only boosts the power but also upgrades the visual effect. Adaptor fittings are sold separately, see fittings page for more details.

NOTE: Non-US buyers please contact us before making a purchase.

Our CNC machined aluminum MAP adapter allows for the use of an aftermarket MAP sensor with a higher PSI capability than the OEM sensor.

NOTE: Non-US buyers please contact us before making a purchase.

Our CNC machined aluminum timing belt guide is much stronger than the OEM plastic guide. With this piece you will no longer have the fear of your timing belt coming loose due to a broken guide.

NOTE: Non-US buyers please contact us before making a purchase.

For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing. All of multi plate clutches come with a lightweight chromoly steel flywheel, and the famous purple anodized forged aluminum clutch cover. Depending on the application, both strap drive and lug drive models are available. All have T5001 cerametallic friction materials for extreme heat resistance. The multi plate clutches are rated up to 800+ foot pounds of torque at the flywheel. And come with spring damper or solid discs depending on the application.

NOTE: Non-US buyers please contact us before making a purchase.

After spending long hours and thousands of dollars building that high powered engine, you need a quality clutch that can properly transfer that power into motion. Count on ACT clutches for quality, performance and affordability.

ACT recognizes that every driver and engine set-up is unique, so a variety of complete clutch kits and components are offered to match virtually any situation. ACT’s complete clutch kits include a pressure plate, disc, release bearing, and (in most cases) a pilot bearing and alignment tool.

NOTE: Non-US buyers please contact us before making a purchase.

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.

HPS Ferro-Compound Features:

• Increased stopping power
• High friction/torque hot or cold
• Gentle on rotors
• Extended pad life
• Low dust
• Virtually noise-free

NOTE: Non-US buyers please contact us before making a purchase.

WRX Oil Cap is a CNC machined, billet aluminum oil cap. Available in red, black or natural finish. It is designed to easily replace the original oil cap and improve the visual effect.

NOTE: Non-US buyers please contact us before making a purchase.

This set of Shifter Bushings is designed for Subaru WRX 2000 and up. They can be easily installed in place of your original rubber bushings. They are designed to add more precise and firmer feel during shifting. The available colors are: red, black or blue.

NOTE: Non-US buyers please contact us before making a purchase.

Battery Holder is specially designed for Subaru WRX. The holder is made of CNC machined aluminum. It is available in natural aluminum, red, blue or black anodized finish. It is designed to easily replace the original battery tie down and improve the visual effect.tie down and improve the visual effect.

NOTE: Non-US buyers please contact us before making a purchase.

This J Hook is a must when installing on a 2008 and up WRX. The existing J hook is too small so we are offering a new, longer one if you are looking to add an older battery holder onto a newer WRX.

NOTE: Non-US buyers please contact us before making a purchase.

Battery Holder is specially designed for Subaru WRX. The holder is made of CNC machined aluminum. It is available in natural aluminum, red, blue or black anodized finish. It is designed to easily replace the original battery tie down and improve the visual effect.tie down and improve the visual effect.

NOTE: Non-US buyers please contact us before making a purchase.

Solenoid Cover is specially designed for Subaru WRX up to '03. The cover is made of CNC machined aluminum. It is available in natural aluminum, red, blue or black anodized finish. It is designed to easily replace the original solenoid cover and add style to your engine. The cover is highly durable.

NOTE: Non-US buyers please contact us before making a purchase.

For use with 2 1/16” (52mm) Gauges

NOTE: Non-US buyers please contact us before making a purchase.

For use with 2 1/16” (52mm) Gauges

NOTE: Non-US buyers please contact us before making a purchase.